旋涂法制备WO3薄膜电致变色性能

"智能窗"大规模推广顺应可持续发展潮流,三氧化钨(WO_3)是生产"智能窗"的一种重要电致变色材料,但调控WO_3薄膜电致变色性能机制仍待进一步研究。采用旋涂法制备WO_3薄膜,重点研究了溶液浓度和旋涂次数对调控WO_3薄膜电致变色性能的影响。通过表面轮廓仪测量薄膜厚度,X射线衍射(XRD)测量薄膜结晶情况,原子力显微镜(AFM)和扫描电子显微镜(SEM)分析薄膜表面形貌,光谱仪测量薄膜初始态、着色态和褪色态的透射率。实验结果表明,随着溶液浓度增加(0. 2～1. 0 mol/L),薄膜厚度从9. 7 nm增加到33. 3 nm,透射率调制能力从0%提升到37. 0%;多次旋涂薄膜厚度线性增长,线性拟合优度(R~2)达0. 98,5次旋涂后透射率调制能力达51. 3%。改变溶液浓度和旋涂次数都是调控薄膜透射率调制能力的有效手段,精准调控薄膜透射率调制能力对设计不同应用场景的电致变色器件具有重大意义。     

Catalytic Activity of Molybdenum Complexes Bearing PNP-Type Pincer Ligand toward Ammonia Formation

We newly designed and prepared a novel molybdenum complex bearing a 4-[3,5-bis(trifluoromethyl)phenyl]pyridine-based PNP-type pincer ligand, based on the bond dissociation free energies (BDFEs) of the N−H bonds in molybdenum-imide complexes bearing various substituted pyridine-based PNP-type pincer ligands. The complex worked as an excellent catalyst toward ammonia formation from the reaction of an atmospheric pressure of dinitrogen with samarium diiodide as a reductant and water as a proton source under ambient reaction conditions, where up to 3580 equivalents of ammonia were formed based on the molybdenum atom of the catalyst. The catalytic activity was significantly improved by one order of magnitude larger than that observed when using the complex before modification.     

High-performance Flexible Symmetric Supercapacitor Based on Heterostructured PANI@MoS2 Nanocomposite Electrode

Three-dimensional (3D) heterostructured molybdenum disulfide (MoS₂) is used as base materials for aniline monomer in situ polymerization on its surface. It is found that the aniline addition has a remarkable effect on the energy storage of the final compounds due to the improvement of the conductivity and structure stability combined with the synergistic effect between the two types of species. The optimal compound of PANI@MoS₂-150 not only shows a high capacitance value of 801.4 F ⋅ g⁻¹ at a current density of 0.5 A ⋅ g⁻¹ but also provides a high retention rate of 77.4 % after 10,000 cycles. The capacitance fading may be due to the increase of the internal resistance analyzed by EIS. Furthermore, a flexible symmetric supercapacitor based on PANI@MoS₂-150 has also been fabricated and the specific capacitance reaches 105 F ⋅ g⁻¹ at a current density of 1 A ⋅ g⁻¹. Impressively, the capacitance retention is larger than 100 % undergoing 10,000 cycles. Besides, the highest energy density of 21 Wh ⋅ kg⁻¹ was obtained. Additionally, the fabricated symmetric supercapacitor demonstrates excellent flexibility.     

Electrochemical Sensors Using Two‐Dimensional Layered Nanomaterials

Two‐dimensional (2D) layered nanomaterials, e.g. graphene and molybdenum disulfide (MoS₂), have rapidly emerged in material sciences due to their unique physical, chemical and mechanical properties. In the meanwhile, there is a growing interest in constructing electrochemical sensors for a wide range of chemical and biological molecules by using these 2D nanomaterials. In this review, we summarize recent advances on using graphene and MoS₂ for the development of electrochemical sensors for small molecules, proteins, nucleic acids and cells detection. We also provide our perspectives in this rapidly developing field.     

Molybdenum-catalyzed reduction of molecular dinitrogen into ammonia under ambient reaction conditions

Synthesis of transition metal–dinitrogen complexes and stoichiometric transformations of their coordinated dinitrogen into ammonia and hydrazine have so far been well investigated in order to achieve a novel nitrogen fixation under ambient conditions. As an extension of our study, the dimolybdenum–dinitrogen complex bearing PNP pincer ligands has been found to work as an effective catalyst for the formation of ammonia from dinitrogen, where 52 equiv of ammonia are produced based on the catalyst (26 equiv of ammonia are produced based on the molybdenum atom of the catalyst). This is the most effective catalytic reaction system for the formation of ammonia from molecular dinitrogen catalyzed by transition metal–dinitrogen complexes as catalysts under ambient reaction conditions. Herein, we describe recent results concerning the catalytic reaction, including the proposed reaction pathway.     

The electrochemical evaluation of antipsychotic drug (promethazine) in biological and environmental samples through samarium cobalt oxide nanoparticles

In this work, we developed a perovskite structured samarium cobalt oxide nanoparticles (SmCoO₃ NPs) with the aid of the co-precipitation method. The rare earth metal (Sm) and cobalt oxide combined to form a perovskite lattice structure. One-pot route synthesized SmCoO₃ NPs were scrutinized successfully through various physicochemical techniques. Concerning its effective thermal stability and electrical properties, the synthesized SmCoO₃ NPs have been effectively implemented in the electrochemical evaluation of promethazine hydrochloride (PHY) using cyclic voltammetry. The electrochemical detection of PHY was performed through SmCoO₃ NPs-modified glassy carbon electrode (GCE) and unmodified GCE. The electron transfer kinetics, effect of scan rate, the influence of pH, electroactive surface area, selectivity, and sensitivity have been studied. The electron charge transfer rate (R_ct) and electrolyte resistance (R_s) were calculated to be 105.59 (Ω) and 150 (Ω) in the ferricyanide probe, indicating great facilitation of the electron transfer between PHY and SmCoO₃ NPs deposited on the electrode surface. Further, the optimized SmCoO₃-modified GCE exemplifies excellent selectivity, storage stability, reproducibility, repeatability, detection limit (5 nM), sensitivity (0.594 μA μM^?1 cm^?2), and wide consecutive linear ranges, respectively. Besides, the proposed method has been effectively employed for the detection of PHY in the various real samples which reveals good recoveries of 95.40–99.17%.     

Binary Metal Oxide Adsorbed Graphene Modified Glassy Carbon Electrode for Detection of Riboflavin

Tungsten oxide (W) decorated titanium oxide (T) adsorbed onto a graphene (Gr) and modified the glassy carbon electrode for the electrochemical quantification of riboflavin (RF) in edible food and pharmaceuticals. For comparison, nanocomposites are formed using graphene oxide (GO), reduced graphene oxide (rGO) and pure graphite (G) sheets to study the electrochemical activities towards riboflavin. The ternary WTGr modified GCE shows the highest electrocatalytic activity due to synergetic interactions between the metal oxide and graphene. The electrochemical observations are supported by the SEM, HRTEM, XRD, UV-Vis, Zeta potential (ζ) and size data. The sensor shows a wide linear range 20 nM–2.5 μM with a detection limit 25.24 nM and sensitivity (4.249×10⁻⁸ A/nM). The fabricated sensor is validated in real samples.     

MoS2 nanosheet arrays supported on hierarchical porous carbon with enhanced lithium storage properties

MoS₂ nanosheet arrays supported on hierarchical nitrogen-doped porous carbon(MoS₂@C)have been synthesized by a facile hydrothermal approach combined with high-temperature calcination.The hierarchical nitrogen-doped porous carbon can serve as three-dimensional conductive frameworks to improve the electronic transport of semiconducting MoS₂.When evaluated as anode material for lithium-ion batteries,the MoS₂@C exhibit enhanced electrochemical performances compared with pure MoS₂ nanosheets,including high capacity(1305.5 mA h g^-1 at 100 mA g^-1),excellent rate capability (438.4 mA h g^-1 at 1000 mA g^-1).The reasons for the improved electrochemical performances are explored in terms of the high electronic conductivity and the facilitation of lithium ion transport arising from the hierarchical structures of MoS₂@C.     

三氧化钼——一种新型有机系钠离子储能器件负极材料

由于锂资源短缺,我们尝试使用三氧化钼作为钠离子储能装置负极材料。通过一种简单的方法合成了三氧化钼,使用XRD、SEM和TEM等测试手段对其物性进行了表征。利用三氧化钼作为有机系钠离子储能器件的负极材料,通过循环伏安和恒流充放电测试探讨了负极材料的储钠机理。以三氧化钼(MoO3)作为负极材料,活性炭(AC)和石墨(graphite)作为正极材料,组装成新型的电化学储能器件,研究了两种器件在1mol/L NaPF6的碳酸丙烯酯(PC)中的电化学性能。两种器件的电压范围分别为0~3.2V和0~3.5V,能量密度最高可分别达到31.6和53 Wh/kg,长循环性能远远优于AC/AC对称电容器。此种储能装置有望成为锂离子电池的一个很好的替代。